Search results for "Spin coating"
showing 10 items of 25 documents
Refractive index controlled by film morphology and free carrier density in undoped ZnO through sol-pH variation
2018
Abstract Zinc oxide thin films, prepared by the sol-gel process, were deposited on glass substrate using spin coating technique. The sol-pH effect on the optical parameters was studied for alkaline sol. The surface roughness was investigated by atomic force microscopy (AFM) and varied from 20 to 40 nm. The optical transmission measurements were carried out to evaluate the behavior of the extinction coefficient and the refractive index. An exponential decay of the refractive index ‘n’ as a function of wavelength was observed. The refractive index increases slightly when the pH increases to pH = 9.5 where it reaches its maximum. Beyond this value, it decreases sharply. This behavior has been …
Determination of elastoplastic properties of TiO2 thin films deposited on dual phase stainless steel using nanoindentation tests
2010
International audience; In recent years, the extraction of mechanical behaviour of thin films by nanoindentation using sharp indenter geometry has been extensively studied. This work investigates the mechanical properties of TiO2 thin film (1 µm thickness) deposited by spin coating on dual phase Duplex stainless steel and glass substrates. Experiments are carried out with different sharp triangular pyramids (a Cube corner and a Berkovich indenter) using a commercial Nano Indenter® XP apparatus. The substrate effect has been counteracted and an inverse method proposed in literature for bulk material has been adapted to assess the elastoplastic parameters of the tested thin film directly from…
Increased conductivity of a hole transport layer due to oxidation by a molecular nanomagnet
2008
Thin film transistors based on polyarylamine poly?N,N?-diphenyl-N,N ?bis?4-hexylphenyl?- ?1,1?biphenyl?-4,4?-diamine ?pTPD? were fabricated using spin coating in order to measure the mobility of pTPD upon oxidation. Partially oxidized pTPD with a molecular magnetic cluster showed an increase in mobility of over two orders of magnitude. A transition in the mobility of pTPD upon doping could also be observed by the presence of a maximum obtained for a given oxidant ratio and subsequent decrease for a higher ratio. Such result agrees well with a previously reported model based on the combined effect of dipolar broadening of the density of states and transport manifold filling. Peer Reviewed
SURFACE EFFECTS ON THE GROWTH OF SOLUTION PROCESSED PENTACENE THIN FILMS
2008
13,6-N-Sulfinylacetamidopentacene (SAP) has been transferred on solid substrates both by water-rich environment and organic solvents without altering his chemical structure. Thermal conversion of SAP to pentacene leads to crystals showing similar features of vacuum-sublimated pentacene both in the bulk and thin-film phases. The thin-film phase is strongly affected by the substrate surface properties. Low energy Si-CH3 rich surfaces allow for the formation of compact micrometric crystals following a Volmer-Weber like growth with orientation suitable for field-effect carrier mobility. Screw dislocations along with straight edges are found on these systems as an indication of a loose interlaye…
Polymer/metal hybrid multilayers modified Schottky devices
2013
Insulating, polymethylmethacrylate (PMMA), and semiconducting, poly(3-hexylthiophene) (P3HT), nanometer thick polymers/Au nanoparticles based hybrid multilayers (HyMLs) were fabricated on p-Si single-crystal substrate. An iterative method, which involves, respectively, spin-coating (PMMA and P3HT deposition) and sputtering (Au nanoparticles deposition) techniques to prepare Au/HyMLs/p-Si Schottky device, was used. The barrier height and the ideality factor of the Au/HyMLs/p-Si Schottky devices were investigated by current-voltage measurements in the thickness range of 1-5 bilayers. It was observed that the barrier height of such hybrid layered systems can be tuned as a function of bilayers …
Investigation of absorber and heterojunction in the pure sulphide kesterite
2021
This paper aims to study the properties of the absorber layer and the heterojunction in kesterite solar cells. The Cu2ZnSnS4 (CZTS) thin films were layered on a glass substrate from a colloidal solution of metal salts and thiourea dissolved in a mixture of water and ethanol and deposited by spin coating technique. The samples were then heat treated in a furnace, in the presence of sulphur powder and under a nitrogen gas flow. The results revealed the formation of homogeneous layers of a pure kesterite phase of CZTS crystallites after heat treatment with correct stoichiometry and oxidation states. The optical transmission measurements indicate an energy band-gap of 1.4 eV and an absorption c…
External quantum efficiency measurements used to study the stability of differently deposited perovskite solar cells
2020
The instability exhibited by perovskite solar cells when exposed to the environment under illumination is one of the major obstacles for the entry of perovskite technology in the photovoltaic market. In this work, we use the external quantum efficiency (EQE) technique to study the photoinduced degradation of two types of solar cells having CH3NH3PbI3 as an absorber layer: one deposited by spin coating with an n-i-p architecture and the other deposited by evaporation with an inverted p-i-n structure. We also study the effect of different encapsulants to protect the cells against atmospheric agents. We find that EQE provides information regarding the areas of the cell most susceptible to degr…
Frequency-Downconversion Stability of PMMA Coatings in Hybrid White Light-Emitting Diodes
2015
We report on the properties of a poly(methyl methacrylate)-based coating used as a host for an organic dye in hybrid white light-emitting diodes. The device is composed by a pump source, which is a standard inorganic GaN/InGaN blue light-emitting diode (LED) emitting at around 450 nm, and a spin-coated conversion layer making use of Lumogen® F Yellow 083. Under prolonged irradiation, the coating exhibits significant bleaching, thus degrading the color rendering performance of the LED. We present experimental results that confirm that the local temperature rise of the operating diode does not affect the conversion layer. It is also proven that, during the test, the photostability of the orga…
Nucleant layer effect on nanocolumnar ZnO films grown by electrodeposition
2013
Different ZnO nanostructured films were electrochemically grown, using an aqueous solution based on ZnCl2, on three types of transparent conductive oxides grow on commercial ITO (In2O3:Sn)-covered glass substrates: (1) ZnO prepared by spin coating, (2) ZnO prepared by direct current magnetron sputtering, and (3) commercial ITO-covered glass substrates. Although thin, these primary oxide layers play an important role on the properties of the nanostructured films grown on top of them. Additionally, these primary oxide layers prevent direct hole combination when used in optoelectronic devices. Structural and optical characterizations were carried out by scanning electron microscopy, atomic for…
Photoconductivity and optical properties of silicon coated by thin TiO2 film in situ doped by Au nanoparticles
2013
Light trapping enhancement by plasmonic-active metal nanoparticles (NPs) is believed to be a promising approach to increase silicon-based solar cell efficiency. Therefore, we investigated TiO2 films in situ doped by Au NPs (TiO2:AuNPs) deposited by spin coating on a silicon substrate. Photoconductivity and optical properties of the TiO2:AuNPs/Si structures were studied in comparison with those of TiO2/Si reference samples. We found that an introduction of the 40–50 nm diameter AuNPs into the antireflective TiO2 layer deteriorates the antireflection properties and decreases the external yield of photogeneration of charge carriers. This is due to an increase of the layer reflection in the red…